Scale Flow Processing with Sentinel

When your flows data collection volume increases to the point that Horizon is too busy processing flows, you can add Sentinel(s) to do the processing instead. Sentinel can do the following:

  • Persist network flow messages with Sentinel to Elasticsearch

  • Consume flow messages from Minions through a message broker (ActiveMQ or Apache Kafka)

  • Generate and send events to the Horizon core instance via message broker

flow integration sentinel
Figure 1. Flow integration with Sentinel

Before you begin

Make sure you have the following:

  • Basic flows environment set up

  • Sentinel installed on your system

  • PostgreSQL, Elasticsearch, and REST endpoint to Horizon core instance running and reachable from the Sentinel node

  • Message broker (ActiveMQ or Apache Kafka) running and reachable from the Sentinel node

  • Credentials for authentication configured for the REST endpoint in the Horizon core instance, message broker, Elasticsearch, and the PostgreSQL database

You must set configuration in the etc directory relative to the Horizon Sentinel home directory. Depending on your operating system, the home directory is /usr/share/sentinel for Debian/Ubuntu or /opt/sentinel for CentOS/RHEL.

Configure access to PostgreSQL database

Connect to the Sentinel Karaf shell via SSH
ssh -p 8301 admin@localhost
Configure access to the PostgreSQL database
config:edit org.opennms.netmgt.distributed.datasource
config:property-set datasource.url jdbc:postgresql://postgres-ip:postgres-port/opennms-db-name(1)
config:property-set datasource.username my-db-user(2)
config:property-set datasource.password my-db-password(3)
config:property-set datasource.databaseName opennms-db-name(4)
config:update
1 JDBC connection string; replace postgres-ip, postgres-port, and opennms-db-name accordingly.
2 PostgreSQL user name with read/write access to the opennms-db-name database
3 PostgreSQL password for my-db-user user
4 Database name of your Horizon Core instance database

Configure access to Elasticsearch

Connect to the Sentinel Karaf shell via SSH
ssh -p 8301 admin@localhost
Configure access to persist flows to Elasticsearch
config:edit org.opennms.features.flows.persistence.elastic
config:property-set elasticUrl http://elastic-ip:9200(1)
config:property-set elasticIndexStrategy hourly(2)
config:property-set settings.index.number_of_replicas 0(3)
config:property-set connTimeout 30000(4)
config:property-set readTimeout 60000(5)
config:update
1 Add the URL to the Elasticsearch cluster.
2 Select an index strategy.
3 Set number of replicas; 0 is a default. In production you should have at least 1.
4 Timeout, in milliseconds, Sentinel waits to connect to the Elasticsearch cluster.
5 Read timeout when data is fetched from the Elasticsearch cluster.

Set up message broker

  • Kafka

  • ActiveMQ

Create a file in etc/featuresBoot.d/flows.boot
sudo vi etc/featuresBoot.d/flows.boot
Add the following features to Sentinel on startup
sentinel-jsonstore-postgres
sentinel-blobstore-noop
sentinel-kafka
sentinel-flows
Connect to the Karaf shell via SSH
ssh -p 8301 admin@localhost
Configure Sentinel tracing and REST endpoint
config:edit org.opennms.sentinel.controller
config:property-set location SENTINEL(1)
config:property-set id 00000000-0000-0000-0000-000000ddba11(2)
config:update
1 A location string is used to assign the Sentinel to a monitoring location with Minions.
2 Unique identifier used as a node label for monitoring the Sentinel instance within {page-component-title).
3 Base URL for the web UI, which provides the REST endpoints.
Configure Sentinel as Kafka consumer for flow messages
config:edit org.opennms.core.ipc.sink.kafka.consumer(1)
config:property-set bootstrap.servers my-kafka-ip-1:9092,my-kafka-ip-2:9092(2)
config:update
1 Edit the configuration for the flow consumer from Kafka.
2 Connect to the following Kafka nodes and adjust the IPs or FQDNs with the Kafka port (9092) accordingly.
Configure Sentinel to generate and send events
config:edit org.opennms.core.ipc.sink.kafka(1)
config:property-set bootstrap.servers my-kafka-ip-1:9092,my-kafka-ip-2:9092(2)
config:update
1 Edit the configuration to send generated events from Sentinel via Kafka.
2 Connect to the following Kafka nodes and adjust the IPs or FQDNs with the Kafka port (9092) accordingly.
To use a Kafka cluster with multiple Horizon instances, customize the topic prefix by setting group.id, which is by default set to OpenNMS. You can set a different topic prefix for each instance with config:edit group.id my-group-id for the consumer and sink.
Configure the credentials and exit Karaf shell
opennms:scv-set opennms.http my-sentinel-user my-sentinel-password(1)
1 Set the credentials for the REST endpoint created in your Horizon Core instance.

The credentials are encrypted on disk in ${SENTINEL_HOME}/etc/scv.jce.

Exit the Karaf Shell with Ctrl+d

Restart the Sentinel to apply the configuration
sudo systemctl restart sentinel
Run health-check to verify configuration
opennms:health-check
Ensure features are installed and work properly
Verifying the health of the container

Verifying installed bundles                    [ Success  ]
Connecting to Kafka from Sink Producer         [ Success  ]
Connecting to Kafka from Sink Consumer         [ Success  ]
Retrieving NodeDao                             [ Success  ]
Connecting to ElasticSearch ReST API (Flows)   [ Success  ]
Connecting to OpenNMS ReST API                 [ Success  ]

=> Everything is awesome
Create a file in etc/featuresBoot.d/flows.boot
sudo vi etc/featuresBoot.d/flows.boot
Add the following features to Sentinel on startup
sentinel-jsonstore-postgres
sentinel-blobstore-noop
sentinel-jms
sentinel-flows
Connect to the Karaf shell via SSH
ssh -p 8301 admin@localhost
Configure Sentinel tracing, REST and ActiveMQ endpoints
config:edit org.opennms.sentinel.controller
config:property-set location SENTINEL(1)
config:property-set id 00000000-0000-0000-0000-000000ddba11(2)
config:property-set broker-url failover:tcp://my-activemq-ip:61616(3)
config:update
1 A location string is used to assign the Sentinel to a monitoring location with Minions.
2 Unique identifier used as a node label for monitoring the Sentinel instance within {page-component-title).
3 Base URL for the web UI, which provides the REST endpoints.
4 URL that points to ActiveMQ broker.
Configure the credentials and exit Karaf shell
opennms:scv-set opennms.http my-sentinel-user my-sentinel-password(1)
opennms:scv-set opennms.broker my-sentinel-user my-sentinel-password(2)
1 Set the credentials for the REST endpoint created in your Horizon Core instance
2 Set the credentials for the ActiveMQ message broker
The credentials are encrypted on disk in ${SENTINEL_HOME}/etc/scv.jce.

Exit the Karaf Shell with Ctrl+d

Restart the Sentinel to apply the configuration
sudo systemctl restart sentinel
Run health-check to verify configuration
opennms:health-check
Ensure features are installed and work properly
Verifying the health of the container

Verifying installed bundles                    [ Success  ]
Retrieving NodeDao                             [ Success  ]
Connecting to JMS Broker                       [ Success  ]
Connecting to ElasticSearch ReST API (Flows)   [ Success  ]
Connecting to OpenNMS ReST API                 [ Success  ]

=> Everything is awesome

Enable flow processing protocols

Connect to the Sentinel Karaf shell via SSH
ssh -p 8301 admin@localhost
  • Netflow v5

  • Netflow v9

  • sFlow

  • IPFIX

config:edit --alias netflow5 --factory org.opennms.features.telemetry.adapters
config:property-set name Netflow-5(1)
config:property-set adapters.0.name Netflow-5-Adapter(2)
config:property-set adapters.0.class-name org.opennms.netmgt.telemetry.protocols.netflow.adapter.netflow5.Netflow5Adapter(3)
config:update
1 Queue name from which Sentinel will fetch messages. By default for Horizon components, the queue name convention is Netflow-5.
2 Set a name for the Netflow v5 adapter.
3 Assign an adapter to enrich Netflow v5 messages.

The configuration is persisted with the suffix specified as alias in etc/org.opennms.features.telemetry.adapters-netflow5.cfg.

To process multiple protocols, increase the index 0 in the adapters name and class name accordingly for additional protocols.
Run health-check to verify adapter configuration
opennms:health-check
Ensure the configured flow adapters work properly
Verifying the health of the container

...
Verifying Adapter Netflow-5-Adapter (org.opennms.netmgt.telemetry.protocols.netflow.adapter.netflow5.Netflow5Adapter)   [ Success  ]
config:edit --alias netflow9 --factory org.opennms.features.telemetry.adapters
config:property-set name Netflow-9(1)
config:property-set adapters.0.name Netflow-9-Adapter(2)
config:property-set adapters.0.class-name org.opennms.netmgt.telemetry.protocols.netflow.adapter.netflow9.Netflow9Adapter(3)
config:update
1 Queue name from which Sentinel will fetch messages. By default for Horizon components, the queue name convention is Netflow-9.
2 Set a name for the Netflow v9 adapter.
3 Assign an adapter to enrich Netflow v9 messages.

The configuration is persisted with the suffix specified as alias in etc/org.opennms.features.telemetry.adapters-netflow9.cfg.

To process multiple protocols, increase the index 0 in the adapters name and class name accordingly for additional protocols.
Run health-check to verify adapter configuration
opennms:health-check
Ensure the configured flow adapters work properly
Verifying the health of the container

...
Verifying Adapter Netflow-9-Adapter (org.opennms.netmgt.telemetry.protocols.netflow.adapter.netflow9.Netflow9Adapter)   [ Success  ]
config:edit --alias sflow --factory org.opennms.features.telemetry.listeners
config:property-set name SFlow(1)
config:property-set adapters.0.name SFlow-Adapter(2)
config:property-set adapters.0.class-name org.opennms.netmgt.telemetry.protocols.sflow.adapter.SFlowAdapter(3)
config:update
1 Queue name from which Sentinel will fetch messages. By default for Horizon components, the queue name convention is SFlow.
2 Set a name for the sFlow adapter.
3 Assign an adapter to enrich sFlow messages.

The configuration is persisted with the suffix specified as alias in etc/org.opennms.features.telemetry.adapters-sflow.cfg.

To process multiple protocols, increase the index 0 in the adapters name and class name accordingly for additional protocols.
Run health-check to verify adapter configuration
opennms:health-check
Ensure the configured flow adapters work properly
Verifying the health of the container

...
Verifying Adapter SFlow-Adapter (org.opennms.netmgt.telemetry.protocols.sflow.adapter.SFlowAdapter)   [ Success  ]
config:edit --alias ipfix --factory org.opennms.features.telemetry.listeners
config:property-set name IPFIX(1)
config:property-set adapters.0.name IPFIX-Adapter(2)
config:property-set adapters.0.class-name org.opennms.netmgt.telemetry.protocols.netflow.adapter.ipfix.IpfixAdapter(3)
config:update
1 Queue name from which Sentinel will fetch messages. By default, for Horizon components, the queue name convention is IPFIX.
2 Set a name for the IPFIX adapter.
3 Assign an adapter to enrich IPFIX messages.

The configuration is persisted with the suffix specified as alias in etc/org.opennms.features.telemetry.adapters-ipfix.cfg.

To process multiple protocols, increase the index 0 in the adapters name and class name accordingly for additional protocols.
Run health-check to verify adapter configuration
opennms:health-check
Ensure the configured flow adapters work properly
Verifying the health of the container

...
Verifying Adapter IPFIX-Adapter (org.opennms.netmgt.telemetry.protocols.netflow.adapter.ipfix.IpfixAdapter)   [ Success  ]